This is an old revision of the document!
Antenna ground box
The antenna ground box provides access to the antenna on the vessel from a laptop or tablet running QGroundControl. The station is composed of
- to provide power from 24V power input
- access point to access mavlink via Wifi
In addition it is possible to connect via the cable with and without power from the 24V system. The router can also be connected with an ethernet cable to have wired access to the telemetry data.
Connections
- 24V power supply from Ship (max. 3A / 6V-38V InputRange)
- Antenna cable with N connector for the Taoglas antenna
- Ethernet cable for wired access
- FTDI UART/USB cable for direct wired access
Jumpers
- Power Switch: Use Power from D24V50F5 DC/DC Converter (Jumper Left) or the USB Power via FTDI Cable (Jumper Right)
- Data Switch: Route the Telemetry RADIO TX/RX to Ethernet (Jumpers Left) or to the FTDI Cable (Jumpers Right)
Mechanical
The electronics is in a Spelsberg box with 300x300x180mm and pole mounting.
- mit
- GEOS MSS-30 Masthalterung mit Schraubschellenset SRS 60-90 und SRS 90-150 und einer
- GEOS-L EP-3030 Montageplatte mit
- GEOS MH-22 Halterset
Waveshare UART to Ethernet
- User: SWing, Pass: SW018
- IP: 192.168.8.100