91��

This is an old revision of the document!

Each camera in the plane is driven by a pi zero. There is a prepared image for this usecase, but some planespecific parameters need to be set for each image.

Download image from Gitlab:
Flash image to SD Card (e.g. using Etcher Tool)
Set HostName to a unique name in /etc/hostname and in /etc/hosts : e.g. Freddy-cam-l
Set Accesspoint depending on left / right camera in /etc/wpa_supplicant/wpa_supplicant.conf :

cam-r : AP1
cam-l : AP2

network={
        ssid="AP1"
        psk="AP-Password"
}

Insert image into plane and power up
First bootup the filesystem of image (~2Gb) is enlarged to the SD-Card size (64Gb)
- Implemented by creating a /data partition where the image will be saved
- Takes ~3-5Minutes
- Afterwards filesystem resize the camera-capture & webserver service is started
You can access each camera via its hostname: ssh searchwing@Freddy-cam-l.local
The recorded images can be checked via webserver in the webbrowser: e.g. http:\\Freddy-cam-l.local
Preflightcheck can be done with the searchwing-pi-manager on the laptop

91����

91��