Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ===== Fuselage Beams ===== Author: Friedrich Beckmann * Saw the beams to a length of 470mm * Use a brush 3 to put UHU POR in the beam opening of the fuselage * Use the same brush to paint one side of the beam with UHU POR * Wait for minimum 10 min to let the UHU POR get dry. => Next One with KLEIBERIT, difficult to bring the beam to the bottom searchwing-fuselage-beams.txt Last modified: 2020/02/13 11:02by beckmanf