thermalsensors

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
thermalsensors [2020/07/10 14:36] – wf68spefthermalsensors [2021/02/02 16:10] (current) – wf68spef
Line 1: Line 1:
 ====== Thermal sensors ====== ====== Thermal sensors ======
 +
 +===== Comparison of cameras =====
 +
 +https://github.com/OpenHD/Open.HD/wiki/Thermal-Cameras
  
 ===== Talk with acalbi sales engineer ===== ===== Talk with acalbi sales engineer =====
Line 104: Line 108:
  * https://www.thingiverse.com/thing:2581533  * https://www.thingiverse.com/thing:2581533
  
 +
 +===== HTI =====
 +
 +  * HT-201 / HT-301
 +  * 320x240 pixel
 +  * 32° Opening angle
 +  * https://www.amazon.de/Thermal-Infrarot-W%C3%A4rmebildkamera-Mobiltelefone-Aufl%C3%B6sung/dp/B07Y4PJF2S/ref=sr_1_1?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=ht-201+thermal&qid=1607201370&sr=8-1
  
 ===== Seek compact ===== ===== Seek compact =====
Line 111: Line 122:
   * < 9 Hz Frame Rate   * < 9 Hz Frame Rate
   * 1,000 ft. Detection Distance (~300m)   * 1,000 ft. Detection Distance (~300m)
-  * waterproof+  * not waterproof!
   * ~250€   * ~250€
 +  * lensmaterial Chalcogenide
  
 ==== Usage ==== ==== Usage ====
Line 133: Line 145:
  
 ''Needs special material as glas blocks IR. Common materials for LWIR windows include silicon, germanium, and zinc selenide (LWIR absorption in silicon is on the order of 15%/mm, which means NEDT is adversely affected using a silicon window. Bulk absorption in germanium and zinc selenide is negligible, and performance is essentially unchanged provided both surfaces of the window are anti-reflection (AR) coated.)'' ''Needs special material as glas blocks IR. Common materials for LWIR windows include silicon, germanium, and zinc selenide (LWIR absorption in silicon is on the order of 15%/mm, which means NEDT is adversely affected using a silicon window. Bulk absorption in germanium and zinc selenide is negligible, and performance is essentially unchanged provided both surfaces of the window are anti-reflection (AR) coated.)''
 +
 +''It should be stated that occasional water, be it fresh or salt, does not damage Germanium lenses if they are rinsed and dried afterwards. Fire fighting cameras regularly get drenched in water and the camera lens protector just needs to be gently cleaned and dried after the shout.'' from https://www.eevblog.com/forum/thermal-imaging/death-of-a-camera-by-drowning-!-flir-vue-its-vulnerabilities-and-death/msg1306467/#msg1306467
  
 From FLIR Lepton Datasheet From FLIR Lepton Datasheet
Line 232: Line 246:
  
 {{::rgb18.png?600|}} {{::rgb18.png?600|}}
 +
 +
 +
  
 === Result === === Result ===
  
 Its visible, that thin plastics are a option. The actual thinnest one doesnt protect at all, its too thin. But maybe we can find some cheap fitting material, or we use the professional thermal plastics. Its visible, that thin plastics are a option. The actual thinnest one doesnt protect at all, its too thin. But maybe we can find some cheap fitting material, or we use the professional thermal plastics.
 +
 +
 +===== Calibration =====
 +
 +  * Images of water are more cold at center than edges
 +    * Due to vignetting
 +    * https://en.wikipedia.org/wiki/Vignetting
 +
 +
 +  * Flat field calibration
 +    * Build avg frame over multiple frames and save flat_field_calib
 +    * frame_corrected = frame_raw - flat_field_calib
 +    * Implementation https://github.com/OpenThermal/libseek-thermal/blob/master/src/SeekCam.cpp#L101
 +
 +
 +
  • thermalsensors.1594384588.txt.gz
  • Last modified: 2020/07/10 14:36
  • by wf68spef