91��

Differences

This shows you the differences between two versions of the page.

--- searchwing-image-download-station [2020/02/21 10:15]
beckmanf added access points
+++ searchwing-image-download-station [2021/03/20 14:44] (current)
bjoernh1
@@ Line 5: / Line 5: @@
 ==== Access points ====
-AP1
+=== AP1 ===��
+��
+This is the main router which provides DHCP service.
 Router IP: 192.168.8.1
-Admin password: ooH0Xahvat
+Admin password: XXXXXXXXXXXXXXX
 WAN Port is Lan Port
-.4 GHz SSID: AP1
+.4 GHz SSID: SW-AP1
 Channel 1
-WIFI Password: Oag3gaeb8f
+WIFI Password: XXXXXX
 TX Power: 10 dBm
 MBit
-GHz SSID: AP1-5G
+GHz SSID: SW-AP1-5G
 Channel 36
-WIFI Password: Oag3gaeb8f
+WIFI Password: XXXXX
 TX Power: 20 dbm
-AP2
+=== AP2 ===��
+��
+This router is connected with the WAN port to a LAN port of AP1.
 Router IP: 192.168.8.200
-Admin Password: ooH0Xahvat
+Admin Password: XXXXX
 WAN Port is Lan Port
-.4 GHz SSID: AP2��
+.4 GHz SSID: SW-AP2��
-Channel 9��
+Channel 11��
-WIFI Password: Oag3gaeb8f
+WIFI Password: XXXXX
 TX Power: 10 dBm
-GHz SSID: AP2-5G��
+GHz SSID: SW-AP2-5G��
-WIFI Password: Oag3gaeb8f
+WIFI Password: XXXXX
 Channel: 44
 MBit
@@ Line 44: / Line 48: @@
 ====  setup Laptop ====
-Configure datastorage with rsync in ''/etc/rsyncd.conf'' on ship laptop
+��
+The laptop is a ASUS TUF FX505DV 8/512 R5-3550H RXT2060 with ��
+��
+  * AMD Ryzen 3550H CPU��
+  * 8 GB DDR4-SDRAM��
+  * 512 GB SSD��
+  * 15.6" Full HD 1920x1080 IPS screen��
+  * AMD Radeon Vega 8 GPU��
+  * NVIDIA GeForce RTX 2060 (6GB GDDR6) GPU��
+  * LAN��
+  * Dual-band WLAN��
+  * Bluetooth��
+��
+running Ubuntu 18.04 LTS (Bionic Beaver)��
+��
+=== rsync ===��
+��
+Configure datastorage with rsync in ''/etc/rsyncd.conf'' on ship laptop.��
+��
+Each flight should have a unique name and needs two folders to be configured. ��
+e.g.
 <code>
-[camimages]��
+[ringo-05032020_0915h-cam-r]��
-path=/home/USER/camimages
+path=/home/USER/flightdata/ringo-05032020_0915h-cam-r��
+hosts allow = *��
+list = true��
+uid = root��
+gid = root��
+read only = false��
+��
+[ringo-05032020_0915h-cam-l]��
+path=/home/USER/flightdata/ringo-05032020_0915h-cam-l
 hosts allow = *
 list = true
@@ Line 55: / Line 87: @@
 read only = false
 </code>
+__**IMPORTANT** Please add cam-r or cam-l at the end, as this encoding is needed for the searchwing-gui to work in correct manner **IMPORTANT**__
 start rsync daemon on ship laptop
   sudo systemctl start rsync
 ====  transfer images ====
-run datatransfer task on each pi ( later triggered via script @ groundcontrol pc)
+run datatransfer task on each pi ( later triggered via script @ groundcontrol pc): e.g.
-  rsync -avvz -u --progress -h /data/bilder/ rsync://GROUNDSTATIONIP/camimages
+  rsync -auv --progress /data/bilder/ rsync://GROUNDSTATIONIP/ringo-05032020_0915h-cam-r��
+��
+  ��
+Don't use the -z option which compresses the data. The images are already compressed and the CPU load will result in 1 MB/s transfer rate compared to 3-4 MB/s without the -z option. (Beck, 23.2.20)��
+If you like to transfer and delete the images from the pi, use the --remove-source-files option.
 ====  troubleshooting ====
@@ Line 75: / Line 116: @@
   sudo systemctl status rsync
+==== WIFI =====
+If Wifi isn't working, first check if the firmware file can be loaded!
+  dmesg | grep rtw_pci
+In Ubuntu 18.04 the firmware for rtw8822 wifi adapter (ASUS TUF FX505DV Laptop) isn't included in linux-firmware ubuntu deb package! So after a Kernel update it can be necessary to fetch it again and copy it to the lib folder.
+  git clone git://git.kernel.org/pub/scm/linux/kernel/firmware/linux-firmware.git
+  cp ./linux-firmware/rtw88/rtw8822c_wow_fw.bin /lib/firmware/rtw88/
+=== eduroam ===
+Eduroam does not work with the default wpasupplicant 2.6 version. I have made a backport of wpasupplicant 2.9 from Ubuntu 19.10.
+{{ ::wpasupplicant_2.9-1ubuntu2_amd64.zip | wpasupplicant package 2.9 }}
+You need to install that package. Please download from this wiki and unzip it.
+<code>
+sudo apt install libnl-route-3-200
+sudo dpkg -i wpasupplicant_2.9-1ubuntu2_amd64.deb
+</code>
+Check that the wpa supplicant service is running with
+<code>
+sudo systemctl status wpa_supplicant.service
+</code>
+In the Wifi Settings for eduroam choose in the "security" settings
+  * Security: WPA & WPA2 Enterprise
+  * Authentication: Tunneled TLS
+  * Anonymous identity: eduroam@hs-augsburg.de
+  * Check "No CA certificate is required"
+  * Inner Authentication: PAP
+  * Username: YOURUSERNAME@hs-augsburg.de
+  * Password: YOURPASSWORD

91����

Differences

91��