Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
searchwing-antenna-ground-box [2021/08/06 12:54] beckmanf Update for Sea-Eye |
searchwing-antenna-ground-box [2022/04/02 09:42] (current) beckmanf [Antenna ground box] add header datasheet |
||
|---|---|---|---|
| Line 4: | Line 4: | ||
| * [[https://www.taoglas.com/product/barracuda-omb-868-05f21-868mhz-omni-directional-outdoor-antenna|Taoglas Barracuda OMB.868.B05F21 868MHz 5dBi Omnidirectional Outdoor Antenna]] | * [[https://www.taoglas.com/product/barracuda-omb-868-05f21-868mhz-omni-directional-outdoor-antenna|Taoglas Barracuda OMB.868.B05F21 868MHz 5dBi Omnidirectional Outdoor Antenna]] | ||
| - | * [[https://eckstein-shop.de/Pololu-5V-5A-Step-Down-Spannungsregler-D24V50F5| Pololu D24V50F5 5V DC/DC converter]] to provide power from 24V power input | + | * [[https://www.pololu.com/product/2851|Pololu D24V50F5 5V DC/DC converter]] to provide power from 24V power input |
| * [[https://www.pusr.com/products/serial-to-ethernet-converter-modules-usr-tcp232-t2.html| USR-TCP232-T2 - UART to Ethernet Converter]] | * [[https://www.pusr.com/products/serial-to-ethernet-converter-modules-usr-tcp232-t2.html| USR-TCP232-T2 - UART to Ethernet Converter]] | ||
| * [[https://www.gl-inet.com/products/gl-ar750/|GL-AR750]] access point to access mavlink via Wifi | * [[https://www.gl-inet.com/products/gl-ar750/|GL-AR750]] access point to access mavlink via Wifi | ||
| - | * The [[searchwing-rf-antenne|RFD868+ Modem]]. | + | * The [[searchwing-rf-antenne|RFD868+ Modem±Õ±ÕÌý |
| + | * The Datasheet of the {{ ::ds_mpe_095.pdf |Angled Header}} available at [[https://www.reichelt.de/buchsenleisten-2-54-mm-2x10-gewinkelt-mpe-095-2-020-p119921.html?&nbc=1|Reichelt]]. | ||
| In addition it is possible to connect via the [[https://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_TTL-232R_CABLES.pdf|FTDI UART/USB]] cable with and without power from the 24V system. The router can also be connected with an ethernet cable to have wired access to the telemetry data. | In addition it is possible to connect via the [[https://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_TTL-232R_CABLES.pdf|FTDI UART/USB]] cable with and without power from the 24V system. The router can also be connected with an ethernet cable to have wired access to the telemetry data. | ||
| + | |||
| + | [[searchwing-antenna-ground-box#antenna_box_v2|Current Version V2]] | ||
| + | |||
| + | ==== Antenna Box V1 ==== | ||
| {{ ::basestationplatine.png?600 |}} | {{ ::basestationplatine.png?600 |}} | ||
| Line 79: | Line 84: | ||
| The image shows the installed SearchWing Antenna Box on the Alan Kurdi. The box contains a Wifi Access Point for a connection to the flight tablet computer. It is therefore recommended to operate the tablet in proximity to the box. | The image shows the installed SearchWing Antenna Box on the Alan Kurdi. The box contains a Wifi Access Point for a connection to the flight tablet computer. It is therefore recommended to operate the tablet in proximity to the box. | ||
| + | ==== Antenna Box V2 ==== | ||
| + | |||
| + | A new PCB board integrates the voltage regulator, RFD868+ modem, UART to Ethernet Converter on one board. Everything is now installed via "Hutschiene". This version was installed on the [[https://www.hs-augsburg.de/searchwing/de/seawatch-tests-2021/|mission with Sea-Watch 4 with Philipp]]. | ||
| === Electronics / Board === | === Electronics / Board === | ||
| - | Franc and Tim design a board for the antenna ground box. | + | Franc and Tim designed a board for the antenna ground box.Ìý |
| + | Ìý | ||
| + | {{ ::sw-ags-pcb-v2.jpg |Antenna Ground Station PCB v1.0 with Hutschienenadapter}}Ìý | ||
| + | Ìý | ||
| + | **Fig. 4:** Antenna Ground Station PCB v1.0 with HutschienenadapterÌý | ||
| + | Ìý | ||
| + | Figure 4 shows the antenna ground box PCB version 1.0. The design data is available at Ìý | ||
| + | Ìý | ||
| + | [[https://easyeda.com/SearchWing/antennagroundstation|Easyeda - Antenna Ground Station PCB Board±Õ±ÕÌý | ||
| + | Ìý | ||
| + | The pcb board is installed with Hutschiene inside the Spelsberg box.Ìý | ||
| + | Ìý | ||
| + | {{ ::sw-ags-box-v2.jpg | Antenna Ground Station v2 with PCB and Hutschiene}}Ìý | ||
| + | Ìý | ||
| + | **Fig. 5:** Antenna Ground Station v2 box with PCB and HutschieneÌý | ||
| + | Ìý | ||
| + | Figure 5 shows the Antenna Ground Station box V2 with PCB and Wifi AP on Hutschiene.Ìý | ||
| + | Ìý | ||
| + | {{ ::sw-ags-ap-hutschiene.jpg |}} | ||
| - | [[https://easyeda.com/SearchWing/antennagroundstation||Easyeda - Antenna Ground Station Board]] | + | **Fig. 6:** Hutschienenadapter mit Sekundenkleber an Wifi AP geklebt |
| + | Figure 6 shows the Wifi Access Point glued with Sekundenkleber to the Hutschienenadapter. | ||