Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
searchwing-antenna-ground-box [2020/02/25 20:31] beckmanf added access point setting |
searchwing-antenna-ground-box [2022/04/02 09:42] (current) beckmanf [Antenna ground box] add header datasheet |
||
|---|---|---|---|
| Line 4: | Line 4: | ||
| * [[https://www.taoglas.com/product/barracuda-omb-868-05f21-868mhz-omni-directional-outdoor-antenna|Taoglas Barracuda OMB.868.B05F21 868MHz 5dBi Omnidirectional Outdoor Antenna]] | * [[https://www.taoglas.com/product/barracuda-omb-868-05f21-868mhz-omni-directional-outdoor-antenna|Taoglas Barracuda OMB.868.B05F21 868MHz 5dBi Omnidirectional Outdoor Antenna]] | ||
| - | * [[https://eckstein-shop.de/Pololu-5V-5A-Step-Down-Spannungsregler-D24V50F5| Pololu D24V50F5 5V DC/DC converter]] to provide power from 24V power inputÌý | + | * [[https://www.pololu.com/product/2851|Pololu D24V50F5 5V DC/DC converter]] to provide power from 24V power inputÌý |
| - | * [[https://eckstein-shop.de/Waveshare-UART-TTL-to-Ethernet-Converter-ETH-RJ45-Module-USR-TCP232-T2| Waveshare USR-TCP2323-T2 - UART to Ethernet Converter]] - [[https://www.waveshare.com/w/upload/b/be/UART_TO_ETH_User_Manual_V1.0.1.pdf| Datasheet]] | + | * [[https://www.pusr.com/products/serial-to-ethernet-converter-modules-usr-tcp232-t2.html| USR-TCP232-T2 - UART to Ethernet Converter]] |
| * [[https://www.gl-inet.com/products/gl-ar750/|GL-AR750]] access point to access mavlink via Wifi | * [[https://www.gl-inet.com/products/gl-ar750/|GL-AR750]] access point to access mavlink via Wifi | ||
| + | * The [[searchwing-rf-antenne|RFD868+ Modem]] | ||
| + | * The Datasheet of the {{ ::ds_mpe_095.pdf |Angled Header}} available at [[https://www.reichelt.de/buchsenleisten-2-54-mm-2x10-gewinkelt-mpe-095-2-020-p119921.html?&nbc=1|Reichelt]]. | ||
| In addition it is possible to connect via the [[https://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_TTL-232R_CABLES.pdf|FTDI UART/USB]] cable with and without power from the 24V system. The router can also be connected with an ethernet cable to have wired access to the telemetry data. | In addition it is possible to connect via the [[https://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_TTL-232R_CABLES.pdf|FTDI UART/USB]] cable with and without power from the 24V system. The router can also be connected with an ethernet cable to have wired access to the telemetry data. | ||
| + | |||
| + | [[searchwing-antenna-ground-box#antenna_box_v2|Current Version V2]] | ||
| + | |||
| + | ==== Antenna Box V1 ==== | ||
| {{ ::basestationplatine.png?600 |}} | {{ ::basestationplatine.png?600 |}} | ||
| + | |||
| + | All electronic components are in the Spelsberg box. | ||
| + | |||
| + | {{::sw-ags-spelzberg.jpg|Antenna Ground Station - Board and Accesspoint}} | ||
| === Connections === | === Connections === | ||
| Line 30: | Line 40: | ||
| * [[https://www.spelsberg.de/industrieleergehaeuse/bis-40-x-50-cm-flexibel/70043301/|GEOS-L 3030-18-o Gehäuse]] mit | * [[https://www.spelsberg.de/industrieleergehaeuse/bis-40-x-50-cm-flexibel/70043301/|GEOS-L 3030-18-o Gehäuse]] mit | ||
| * GEOS MSS-30 Masthalterung mit Schraubschellenset SRS 60-90 und SRS 90-150 und einer | * GEOS MSS-30 Masthalterung mit Schraubschellenset SRS 60-90 und SRS 90-150 und einer | ||
| - | * GEOS-L EP-3030 Montageplatte mitÌý | + | * GEOS-L EP-3030 Montageplatte mit (NOT USED)Ìý |
| - | * GEOS MH-22 Halterset | + | * GEOS MH-22 Halterset (WRONG!!! This is too long and probably useless) |
| === Waveshare UART to Ethernet === | === Waveshare UART to Ethernet === | ||
| * User: SWing, Pass: SW018 | * User: SWing, Pass: SW018 | ||
| - | * IP: 192.168.8.100Ìý | + | * IP: Alan Kurdi: 192.168.8.50, Sea-Eye 4: 192.168.8.2 Ìý |
| - | * MAC: 9C:A5:25:A0:48:B4 | + | * MAC: Alan Kurdi: 9C:A5:25:A0:48:B4, Sea-Eye 4: 9C:A5:25:A0:48:51Ìý |
| + | Ìý | ||
| + | Configuration:Ìý | ||
| + | Ìý | ||
| + | * Baud Rate: 57600, 8 Databits, No Parity, 1 StopbitÌý | ||
| + | * Local Port: 14550Ìý | ||
| + | * Remote Port Number: 14550Ìý | ||
| + | * Work Mode: UDP ClientÌý | ||
| + | * Remote Server Addr: 192.168.8.255 | ||
| === Access Point === | === Access Point === | ||
| * Type: GL-Inet AR750 | * Type: GL-Inet AR750 | ||
| - | * SSID: SearchWing-AntBoxÌý | + | * SSID: SW-AntBox-5G (5 GHz), SW-AntBox-24G (2.4 GHz)Ìý |
| - | * Wifi Password: cassandraÌý | + | * Wifi Password: GEHEIMÌý |
| - | * 5 GHz Channel 48, 2.4 GHz is OFF | + | * 5 GHz Channel 48, 2.4 GHz Channel 1 |
| * Router IP: 192.168.8.1 | * Router IP: 192.168.8.1 | ||
| - | * Admin Password: cassandra | + | * LAN as DHCP with UARTtoEth via MAC Binding to fixed address)Ìý |
| + | * Admin Password: GEHEIM | ||
| The changes made from factory setting are: | The changes made from factory setting are: | ||
| * Wifi SSID, Passwords | * Wifi SSID, Passwords | ||
| - | * 2.4 GHz OFFÌý | + | * Bind MAC from UART2ETH WaveShare to IP (Kurdi: 192.168.8.50, Sea-Eye 4: 192.168.8.2)Ìý |
| - | * Bind MAC from UART2ETH WaveShare to IP 192.168.8.100 | + | Ìý |
| + | ==== Installation ====Ìý | ||
| + | Ìý | ||
| + | The installation requiresÌý | ||
| + | Ìý | ||
| + | * 24 DC power supply cableÌý | ||
| + | * install of the Taoglas AntennaÌý | ||
| + | * install of the Spelzberg boxÌý | ||
| + | * optional install of the Ethernet Cable for fixed wire accessÌý | ||
| + | Ìý | ||
| + | {{::sw-antenna-kurdi.jpg?1024|Antenna Ground Box on Alan Kurdi}}Ìý | ||
| + | Ìý | ||
| + | The image shows the installed SearchWing Antenna Box on the Alan Kurdi. The box contains a Wifi Access Point for a connection to the flight tablet computer. It is therefore recommended to operate the tablet in proximity to the box.Ìý | ||
| + | Ìý | ||
| + | ==== Antenna Box V2 ====Ìý | ||
| + | Ìý | ||
| + | A new PCB board integrates the voltage regulator, RFD868+ modem, UART to Ethernet Converter on one board. Everything is now installed via "Hutschiene". This version was installed on the [[https://www.hs-augsburg.de/searchwing/de/seawatch-tests-2021/|mission with Sea-Watch 4 with Philipp]].Ìý | ||
| + | Ìý | ||
| + | === Electronics / Board ===Ìý | ||
| + | Ìý | ||
| + | Franc and Tim designed a board for the antenna ground box.Ìý | ||
| + | Ìý | ||
| + | {{ ::sw-ags-pcb-v2.jpg |Antenna Ground Station PCB v1.0 with Hutschienenadapter}}Ìý | ||
| + | Ìý | ||
| + | **Fig. 4:** Antenna Ground Station PCB v1.0 with HutschienenadapterÌý | ||
| + | Ìý | ||
| + | Figure 4 shows the antenna ground box PCB version 1.0. The design data is available at Ìý | ||
| + | Ìý | ||
| + | [[https://easyeda.com/SearchWing/antennagroundstation|Easyeda - Antenna Ground Station PCB Board]]Ìý | ||
| + | Ìý | ||
| + | The pcb board is installed with Hutschiene inside the Spelsberg box.Ìý | ||
| + | Ìý | ||
| + | {{ ::sw-ags-box-v2.jpg | Antenna Ground Station v2 with PCB and Hutschiene}}Ìý | ||
| + | Ìý | ||
| + | **Fig. 5:** Antenna Ground Station v2 box with PCB and HutschieneÌý | ||
| + | Ìý | ||
| + | Figure 5 shows the Antenna Ground Station box V2 with PCB and Wifi AP on Hutschiene.Ìý | ||
| + | Ìý | ||
| + | {{ ::sw-ags-ap-hutschiene.jpg |}} | ||
| + | **Fig. 6:** Hutschienenadapter mit Sekundenkleber an Wifi AP geklebt | ||
| + | Figure 6 shows the Wifi Access Point glued with Sekundenkleber to the Hutschienenadapter. | ||