[[dt-code]]

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
dt-code [2011/01/10 12:52]
beckmanf Funktionale Beschreibung des Multiplexers eingefügt. 		dt-code [2025/04/10 16:09] (current)
beckmanf bilder in dokuwiki
Line 1: Line 1:
-=== VHDL Code Beispiele ​===+===== VHDL Entity and Architecture =====
  
-== Entity ​and Architecture ==+VHDL splits interface (entity) ​and implementation (architecture). The interface of a circuit is defined in the entity. The implementation is defined in the architecture.
  
 <code vhdl> <code vhdl>
Line 11: Line 11:
   a_i : in std_ulogic;   a_i : in std_ulogic;
   b_i : in std_ulogic; ​   b_i : in std_ulogic; ​
-  ​y_i : out std_ulogic);​Ìý+  ​y_o : out std_ulogic);​Ìý
-end first;+end and_gate;
  
 architecture rtl of and_gate is architecture rtl of and_gate is
 begin begin
   y_o <= a_i and b_i;    y_o <= a_i and b_i; 
-end rtl; Ìý+end architecture ​rtl; 
-  ​+
 </​code>​ </​code>​
 +Listing 1: Entity and Architecture for and_gate
 +
 +The code in listing 1 describes the full code for a circuit called "​and_gate"​. The entity with the name "​and_gate"​ describes two input ports "​a_i"​ and "​b_i"​ and an output port "​y_o"​. All ports here have the type "​std_ulogic"​ which defines that those ports basically can have a logic 1 or 0 value. (Some other values for simulation purposes are left for now). An entity can have an arbitrary number of inputs and outputs. Each input and output can have a different type.
 +
 +{{ :​public:​praktikum_digitaltechnik:​and_gate.svg?​width=300 |AND Gate Block}}
 +
 +{{ :​public:​praktikum_digitaltechnik:​and_gate.svg?​linkonly |Figure 1}}: Block and_gate with a_i and b_i as inputs and y_o as output
  
-== Strukturelle Beschreibung von Schaltungen ​==+Figure 1 shows the block "​and_gate"​ with the inputs and outputs. This represents the entity. The entity code does not imply any functionality. The name "​and_gate"​ is an identifier, i.e. it does not imply that this block actually works as an and gate.Ìý
 +Ìý
 +{{ :​public:​praktikum_digitaltechnik:​and_gate_arch.svg?​width=300 |}}Ìý
 +Ìý
 +{{ :​public:​praktikum_digitaltechnik:​and_gate_arch.svg?​linkonly |Figure 2}}: Architecture of "​and_gate"​ which just contains an AND gate.Ìý
 +Ìý
 +The architecture with the name "​rtl"​ describes the implementation. Here it is a signal assignment with a boolean expression using the and function. This makes this circuit behave like an AND gate. Figure 2 shows the schematic with the AND gate. As the AND function can be described in one line of code, this block "​and_gate"​ does not make too much sense, but it explains the idea of entity and architecture.Ìý
 +Ìý
 +===== Instantiation and hierarchical design =====Ìý
 +Ìý
 +Circuits are very often composed of subcircuits. And the subcircuits can themself be composed of subcircuits. This is called hierarchical design. The following example shows a block "​mux"​. Ìý
 +Ìý
 +{{ :​public:​praktikum_digitaltechnik:​mux.svg?​width=200 | Multipexer block}}Ìý
 +Ìý
 +{{ :​public:​praktikum_digitaltechnik:​mux.svg?​linkonly |Figure 3}}: "​mux"​ block with a_i, b_i and s_i inputs and y_o outputÌý
 +Ìý
 +Figure 3 shows the block interface of a circuit "​mux"​ which has three inputs a_i, b_i and s_i and an output y_o. Ìý
 +Ìý
 +This "​mux" ​ is composed of two instances of "​and_gate",​ an "​or_gate"​ and an "​inv_gate"​.Ìý
 +Assume that we have defined not only the "​and_gate"​ but also an "​or_gate"​ and an "​inv_gate"​. The mux circuit shall be composed of the xxx_gate subcircuits as shown in figure 4.Ìý
 +Ìý
 +{{ :​public:​praktikum_digitaltechnik:​mux-vhdl.svg?​width=800 | Mux Schematic}}Ìý
 +Ìý
 +{{ :​public:​praktikum_digitaltechnik:​mux-vhdl.svg?​linkonly |Figure 4}}: Schematic of "​mux"​Ìý
 +Ìý
 +Figure 4 shows a schematic of a multiplexer using and_gate, or_gate and the inv_gate. The corresponding VHDL code is shown in listing 2.
  
 <code vhdl> <code vhdl>
Line 35: Line 66:
 end mux; end mux;
  
-architecture structure of mux isÌý+architecture structure of mux is    ​
-Ìý+
-  component and_gate Ìý+
-    port(Ìý+
-      a_i : in std_ulogic;​Ìý+
-      b_i : in std_ulogic;​Ìý+
-      y_o : out std_ulogic);​Ìý+
-      Ìý+
-  component or_gateÌý+
-    port(Ìý+
-      a_i : in std_ulogic;​Ìý+
-      b_i : in std_ulogic;​Ìý+
-      y_o : out std_ulogic);​Ìý+
-  Ìý+
-  component inv_gateÌý+
-    port(Ìý+
-      a_i : in std_ulogic;​Ìý+
-      y_o : out std_ulogic);​Ìý+
-      ​+
   signal s1 : std_ulogic;   signal s1 : std_ulogic;
   signal s2 : std_ulogic;   signal s2 : std_ulogic;
   signal s3 : std_ulogic; ​       signal s3 : std_ulogic; ​    
-    ​ 
 begin begin
  
-  inv_gate_i0 : inv_gate+  inv_gate_i0 : work.inv_gate
   port map(   port map(
     a_i => s_i,     a_i => s_i,
     y_o => s1);     y_o => s1);
     ​     ​
-  and_gate_i0 : and_gate+  and_gate_i0 : work.and_gate
   port map(   port map(
     a_i => s1,     a_i => s1,
Line 71: Line 83:
     y_o => s2);     y_o => s2);
     ​     ​
-  and_gate_i1 : and_gate+  and_gate_i1 : work.and_gate
   port map(   port map(
     a_i => s_i,     a_i => s_i,
Line 77: Line 89:
     y_o => s3);     y_o => s3);
   ​   ​
-  or_gate_i0 : or_gate+  or_gate_i0 : work.or_gate
   port map(   port map(
     a_i => s2,     a_i => s2,
Line 83: Line 95:
     y_o => y_o);     y_o => y_o);
  
-end mux; +end architecture structure; 
  
 </​code>​ </​code>​
  
-== Funktionale Beschreibung mit Concurrent Signal Assignments ==+Listing 2: Structural VHDL code that instantiates and_gate, or_gate and inv_gate
  
-Eine alternative Beschreibung des Multiplexers mit Funktionen und Ìý+The instantiation code introduces the name of the instance. In this example the names of the "and_gate" ​instances are "​and_gate_i0" and "and_gate_i1". The instantiation code instantiates ​"work.and_gate"​ which means that there is a component "​and_gate"​ assumed to be in library "​work"​. The "​and_gate"​ component is created in the work library when the corresponding vhdl code that defines the "​and_gate"​ is compiled.
-Concurrent Signal Assignments. Die Funktionen ​"not" "​and"​, "or" ​und andereÌý+
-sind im package ieee.std_logic_1164 definiert. +
  
-<code vhdl>+===== Signals =====
  
-architecture rtl-1 of mux isÌý+Note the signals ​s1, s2 and s3 in listing 2 which work as internal nets in "​mux"​. But it is also possible to assign the value of an input port to a signal. The value of a signal can also be assign to an output port.
-signal ​s1, s2, s3 : std_ulogic;​Ìý+
-begin+
  
-s1 <= not s_i;Ìý+Signals are defined between "​architecture" ​and the following "​begin"​.
-s2 <= s1 and a_i;Ìý+
-s3 <= s_i and b_i;Ìý+
-y_o <= s2 or s3;  ​+
  
-end rtl-1Ìý+===== Multiplexer Code - the real thing =====
-</​code>​+
  
-== Funktionale Beschreibung mit einem Prozess ==Ìý+The previous code example ​in listing 2 and listing 1 show the hierarchical design of a multiplexer. Nobody would ever do it like that - it only serves as an example for hierarchical design which is used when the subcircuits have some complexity. The multiplexer function as described ​in listing 2 can be written in one line of code in VHDL. Listing 3 shows the full code of "​mux"​ with entity ​and architecture. The function inside the architecture is only one line of code.
-Ìý+
-Ein Prozess enthält sequentielle Anweisungen. Ein Prozess wird immer ausgeführt,​ wennÌý+
-sich ein Signal ​in der "​sensitivity list" ändert. Ìý+
-Ìý+
-Die Sequenz der Anweisungen ​in einem Prozess entspricht nicht einer zeitlichen Sequenz. Ìý+
-Das bedeutet der Prozess berechnet die neuen Werte der Signale und diese werden dann alleÌý+
-zeitgleich zugewiesen. Im folgenden Beispiel wurde die Anweisung s3 <= s_i and b_i durch einenÌý+
-Prozess ersetzt. Die Funktion hat sich dadurch nicht geändert. +
  
 <code vhdl> <code vhdl>
 +library ieee;
 +use ieee.std_logic_1164.all;​
  
-architecture rtl-2 of mux isÌý+entity ​mux isÌý
-signal s1, s2, s3 : std_ulogic;​Ìý+port (Ìý
-begin+  a_i : in std_ulogic;​Ìý
 +  b_i : in std_ulogic;​Ìý
 +  s_i : in std_ulogic;​Ìý
 +  y_o : out std_ulogic);​Ìý
 +end mux;
  
-s1 <= not s_i;Ìý+architecture rtl of mux is    ​
-s2 <= s1 and a_i;Ìý+
--- s3 replaced with processÌý+
-y_o <= s2 or s3; Ìý+
-Ìý+
-s3_and_p : process (s_i, b_i)+
 begin begin
-  s3 <= '​0';​Ìý+y_o <= a_i when s_i = '0' ​else b_i;Ìý
-  if s_i = '1' ​and b_i = '​1'​ then Ìý+end architecture;
-    s3 <= '​1'​;Ìý+
-  end if;Ìý+
-end process s3_and_p;Ìý+
-Ìý+
-end rtl-2+
 </​code>​ </​code>​
  
-== Komplette funtkionale Beschreibung in einem Prozess ==Ìý+Listing ​3: Multiplexer Code in one line
-Ìý+
-Alternativ lässt sich auch die ganze Multiplexerfunktion in einemÌý+
-Prozess beschreiben. Die Lesbarkeit wird durch diese Beschreibung häufig erhöht. Ìý+
-Ìý+
-<code vhdl>Ìý+
-Ìý+
-architecture rtl-3 of mux isÌý+
-Ìý+
-beginÌý+
-Ìý+
-mux_p : process (s_i, a_i, b_i)Ìý+
-beginÌý+
-  y_o <= '​0';​Ìý+
-  if s_i = '​1'​ thenÌý+
-    y_o <= b_i; Ìý+
-  elseÌý+
-    y_o <= a_i; Ìý+
-  end if;Ìý+
-end process mux_p;Ìý+
-Ìý+
-end rtl-3Ìý+
-</​code>​Ìý+
-Ìý+
-== Prozess mit einem case statement ==Ìý+
-Ìý+
-Alternativ lässt sich auch ein case statement ​in einem Prozess verwenden. Ìý+
-Ìý+
-<code vhdl>Ìý+
-Ìý+
-architecture rtl-4 of mux isÌý+
-Ìý+
-beginÌý+
-Ìý+
-mux_p : process (s_i, a_i, b_i)Ìý+
-beginÌý+
-  y_o <= '​0';​Ìý+
-  case s_i isÌý+
-    when '​0' ​   => y_o <= b_i;Ìý+
-    when '​1' ​   => y_o <= a_i;Ìý+
-    when others => y_o <= '​0';​Ìý+
-  end case;Ìý+
-end process mux_p;Ìý+
-Ìý+
-end rtl-4Ìý+
-</​code>​Ìý+
-Ìý+
-== Conditional Signal Assignment ==Ìý+
-Ìý+
-Dann gibt es noch das Conditional Signal Assignment. Ìý+
-Ìý+
-<code vhdl>Ìý+
-Ìý+
-architecture rtl-5 of mux isÌý+
-Ìý+
-beginÌý+
-Ìý+
-y_o <= b_i when s_i = '​1'​ else a_i; Ìý+
-Ìý+
-end rtl-5Ìý+
-</​code>​Ìý+
-Ìý+
-== Selected Signal Assignment ==Ìý+
-Ìý+
-Noch eine alternative ist das selected signal assignment. Ìý+
-Ìý+
-<code vhdl>Ìý+
-Ìý+
-architecture rtl-6 of mux isÌý+
-Ìý+
-beginÌý+
-Ìý+
-with s_i selectÌý+
-  y_o <= a_i when '​0',​Ìý+
-  y_o <= b_i when '​1';​Ìý+
-Ìý+
-end rtl-6Ìý+
-</​code>​Ìý+
-Ìý+
-Ìý+
  
  
  
  • dt-code.1294660359.txt.gz
  • Last modified: 2011/01/10 12:52
  • by beckmanf